Metalworking semi-synthetic fluid EASYCUT BASE201 for light and medium duty machining, canister 19 L

• Kinematic viscosity of the concentrate at 20°C, mm2/s — 460
• ≈Mineral oil content, % — 20%
• pH of fresh 5% emulsion: 10,4*
• Corrosion protection DIN 51360/2 — 4% — corrosion degree 0
• Refractometer factor, %/°Brix — 1.6"

Recommendations / Features

• To prepare a high-quality finely dispersed emulsion, it is recommended to use the automatic mixer device, for example CS-30
• For manual preparation, it is recommended to slowly add the concentrate to the water (not water to the concentrate), mixing evenly
• The recommended concentration depends on the cutting operations and the material being processed. Grinding: 4-6% | Turning and milling operations: 7-10% (steel, cast iron) / 8–12% (aluminum)
• The concentration of the working emulsion is measured by a manual (LQ20T)  or electronic refractometer. To do this, the read value is multiplied by the refractometer factor of 1.6
• EASYCUT BASE201 coolant can be used for processing of aluminum alloys. However, the tendency of such alloys to form spots (darkening) should be checked in advance

Shelf life / Storage conditions

• Stable for 12 months when stored at a temperature of 5 °C to 40 °C in unopened containers.

Comments

• Minor variations in color and appearance are possible due to the raw materials chosen. However, these have no influences on the functionality of the product
• All information on safe and proper handling can be found on the MSDS

DESIGNED IN GERMANY

* The increased pH in the fresh emulsion may cause a temporary strong odor and temporary darkening on aluminum alloys in the first 1-3 days of operation. Afterwords the pH should drops to normal values of 9–9.5