EASYCUT VEG001 Metalworking Coolant (KSS), Bio Ester, Drum 208 l

Technical Data

• Kinematic viscosity of the concentrate at 20°C, mm2/s – 177
• ≈Mineral oil content, % – 0%
• pH of fresh 5% emulsion: 9,3
• Сorrosion protection DIN 51360/2 – 4% – corrosion degree 0
• Refractometer factor, %/°Brix – 1.3

Recommendations / Features

• To prepare a high-quality finely dispersed emulsion, it is recommended to use the automatic mixer device, for example CS-30
• For manual preparation, it is recommended to slowly add the concentrate to the water (not water to the concentrate), mixing evenly
• The recommended concentration depends on the cutting operations and the material being processed. Turning and milling operations: light to medium duty machining from 5% | heavy duty machining from 8%
• The concentration of the working emulsion is measured by a manual (LQ20T) or electronic refractometer. To do this, the read value is multiplied by the refractometer factor of 1.3
• EASYCUT VEG001 coolant can be used for processing of ANY aluminum alloys. However, the tendency of such alloys to form spots (darkening) should be checked in advance

Shelf life / Storage conditions

• Stable for 12 months when stored at a temperature of 5 °C to 40 °C in unopened containers.

Comments

• Minor variations in color and appearance are possible due to the raw materials chosen. However, these have no influences on the functionality of the product
• All information on safe and proper handling can be found on the MSDS

DESIGNED IN GERMANY